Security within facilities – CCTV, access controls, alarms, fire detection and suppression and so on – is today increasingly integrated and digital, yet it is often an afterthought when a new building is designed, says Kobus Le Roux, national sales and marketing executive, Jasco Security Solutions.

The result is usually less than optimal, with repercussions in terms of the effectiveness and functionality of the final security solution, as well high long term maintenance costs.

With two large client security retrofit projects underway and one new build, Jasco Security Solutions has a first-hand perspective of the challenges organisations face, and the benefits they can gain by incorporating security into the design of a facility.

Ideally, the design of the security system in a purpose-built facility will be done together with the owner or prospective occupants, a building consultant who co-ordinates design and construction, and an electrical engineer. The security systems required and the desired functionality needs to be defined, and regulatory issues, such as placement of fire alarms and sensors, need to be taken into consideration.

Once routing is decided, the infrastructure needs to be installed, preferably by cabling and security system experts.

As most security systems are now IP-based, the facility owner needs to decide whether the security system will become part of the converged data, video and voice network, or if it will run on a separate network. When security shares the working data or video network, priority conflicts can occur. In addition, as access to this network is greater, security systems are made vulnerable to human error and mischief.

The other great challenge, as some Jasco clients have discovered is that when security runs on mission critical networks, those networks can be compromised when security solutions need to be maintained, upgraded or refitted.

For a Jasco client in the healthcare sector with a five-building campus in Johannesburg, a complete overhaul of an existing access control and CCTV network became necessary.

Using disparate contractors over a number of years to upgrade and expand its CCTV and access control systems, and with no set standards or integrated security strategy to guide implementations, the company ended up with an incomprehensible scramble of network connections.

A large part of the challenge was that new head-end equipment was added to the network without regard for capacity. There was also no documentation of the work done. With a CCTV system that only worked at 50 percent capacity and a need to extend its access control solution, the organisation decided to implement a new all-IP access control solution. It asked Jasco to assist.

Once the Jasco team had done the diagnostics and reconfigured the network, it rolled out a fibre network for the organisation, and placed the CCTV solution on a separate network. For the access control solution, Jasco had to make use of and extend the existing installation. In many instances new conduit had to be placed inside or along walls, an expensive and inconvenient workaround.

For another client in the retail sector, Jasco took on two very different projects. On a new build for company, an architect rather than a consultant took up the main role and Jasco provided specifications and advice on security technology requirements. The customer also brought in specialist cabling contactors. In particular, there are a number of regulations around fire alarms – their positioning and how they are provisioned.

The benefits of getting it right for this customer are significant. Because it is a bespoke building, security solutions – CCTV cameras, access control, etc. – can be fitted to suit the function and layout of each department. This can be quite important. If, for example, cash will be handled in an area, the camera setup will be very different than the setup for a stock room or reception area.

The second project is a refit of the old building the organisation had vacated. At present the building is being stripped out. It will be difficult to refit with a lot of construction required to ensure an aesthetically appealing finish.

For leading insurance client Jasco took on a refit project. The facility had been struck by lightning and required a complete refit of the access control system, which was to include biometrics, and of the CCTV system.

Jaco installed an all-IP backbone for the organisation, piping in the fibre from scratch and installing new CCTV head-end equipment. Additional infrastructure to facilitate capacity growth is being included. Another contractor handled the installation of a lightning protection mesh structure on the building.

To sum up, there are a few key practicalities to bear in mind to ensure successful incorporation of security into a building at design phase.

First, understand basic and then specific needs of the facility and the tenants. Ensure the tender proposals incorporate a step by step method statement and project plan. Gain input from a consultant and the relevant specialists. Ensure regulations are complied with in terms of fire and other equipment placement and related specifications.

When it comes to implementing the solutions, employing a project manager who is aware of the priority assigned to security, and ensuring weekly status meetings are held between all stakeholders will help keep the project on track. If different subcontractors are used, good communication and collaboration between the teams are essential.

And, in selecting a solution provider, look for an organisation with a good track record, one that has the experience you need, has a good understanding of the capabilities of the latest technology along with a holistic view of how the needs and requirements of your organisation will be met and, possibly most importantly, is conversant with best practices in delivery of the solution.